MSI Afterburner & RTSS Setup Guide — 1% Low OSD, Flat Frametimes & Safe GPU Undervolting (2026)
Pairing MSI Afterburner with RivaTuner Statistics Server (RTSS) turns guesswork into measurable frame-pacing engineering. Enabling Afterburner's Benchmark plugin exposes true 1% Low and 0.1% Low FPS plus real-time frametime graphs, RTSS's CPU-level frame limiter flattens jittery in-game frame caps, Stealth Mode avoids anti-cheat conflicts during offline tuning, and a Voltage/Frequency Curve (Ctrl+F) undervolt cuts GPU temperatures by 6–10°C while locking higher sustained Boost clocks.
1. Download Official MSI Afterburner + Bundled RTSS Safely (Avoid Fake Ad Mirrors)
Zero Malware RiskFake Google search ads frequently spoof MSI Afterburner downloads with crypto-stealers. Download ONLY from msi.com/Landing/afterburner/graphics-cards (or Guru3D's verified Unwinder thread). During setup, keep 'RivaTuner Statistics Server' checked so both tools install together, and verify the binary's digital signature via PowerShell afterward.
Show optional PowerShell / Registry command (advanced)Registry / System Parameter
Get-AuthenticodeSignature "C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe"2. Enable the 'Benchmark' Plugin & Configure 1% Low, 0.1% Low & Frametime OSD
Exposes Hidden StuttersOpen Afterburner Settings (gear icon) -> Monitoring tab -> click the '...' button next to Active hardware monitoring graphs and enable 'Benchmark.dll' (plus CPU.dll if missing). Tick Framerate, Frametime (set 'Show in On-Screen Display' as 'text, graph'), Framerate 1% Low, Framerate 0.1% Low, GPU temperature, GPU power, CPU temperature, and CPU usage. Bind 'Begin recording' and 'End recording' hotkeys (e.g., F9/F10) because 1% Low and 0.1% Low counters only populate while a benchmark session is recording.
Afterburner Settings -> Monitoring -> Active hardware monitoring graphs: Check Framerate, Frametime (Text + Graph), Framerate 1% Low, Framerate 0.1% Low, GPU Temp/Power, CPU Temp/Usage -> Assign Begin/End Recording Hotkeys3. Set RTSS Frame Rate Limit for Razor-Flat Frametime Pacing
Flat 6.9ms / 4.1ms Frame PacingIn-game FPS limiters often rely on imprecise sleep timers that produce sawtooth frametime spikes. RTSS enforces frame pacing at the CPU present call via a microsecond-accurate busy-wait loop, turning jagged frametime graphs into a razor-flat line. On G-Sync/FreeSync displays, cap 3–4 FPS below max refresh (141 for 144Hz, 237 for 240Hz); if a game natively integrates NVIDIA Reflex + Boost, you can compare Reflex's built-in cap against RTSS and keep whichever shows lower 0.1% Low variance.
RTSS -> Framerate limit = (Monitor Hz - 3) for G-Sync/FreeSync OR Sustainable 99%-Load Cap (e.g., 141 for 144Hz, 237 for 240Hz)Set RTSS -> Framerate limit = 0 (Disabled)4. Enable 'Stealth Mode' & Disable 'Custom Direct3D Support' for Anti-Cheat Compatibility
Prevents EAC/Vanguard/FACEIT BlocksKernel anti-cheats (FACEIT AC, Riot Vanguard, Easy Anti-Cheat, CS2 Trusted Mode) flag aggressive DLL injection hooks. In RTSS, set Application detection level to Low, turn Stealth mode ON, and keep Custom Direct3D support OFF. Note that CS2 Trusted Mode and FACEIT AC still block third-party OSD overlays unless you run offline benchmarks with '-allow_third_party_software' in CS2—while Afterburner's GPU undervolt curve remains applied at the driver level even with RTSS closed!
RTSS Global Profile -> Application detection level = Low | Stealth mode = ON | Custom Direct3D support = OFF5. Perform a Safe GPU Voltage/Frequency Curve (Ctrl+F) Undervolt (-6°C to -10°C)
-6°C to -10°C & Higher Sustained BoostFirst note your stock gaming boost clock and voltage in OSD (e.g., 2730 MHz at 1.075V). Press Ctrl+F to open the Curve Editor, select the node at 925–950 mV, drag it up to your stock boost clock, then hold Shift and drag-select every node to the right of it down below that frequency and press Enter so the curve flattens into a horizontal shelf. Click Apply (checkmark) and save to Profile 1—do NOT enable 'Apply overclocking at system startup' until stability is proven.
Afterburner Settings -> Unlock voltage monitoring -> Press Ctrl+F -> Target stable Boost clock (e.g., 2745 MHz @ 950 mV on RTX 40 / 1920 MHz @ 900 mV on RTX 30) -> Flatten all points to the right -> Apply -> Save to Profile 1Click the circular Reset arrow in MSI Afterburner main window and click Apply (checkmark) to restore factory V/F curve.6. Validate Stability in Real Games & Check Event Viewer for Zero Driver Resets
100% Crash-Free TuningSynthetic fur tests power-throttle before reaching peak boost clocks—real DX12/Vulkan games with ray tracing or heavy shaders expose unstable undervolts much faster. Play 20–30 minutes across two demanding games while recording RTSS 1% / 0.1% Low, then run the PowerShell command above to verify zero 'Display driver stopped responding and has recovered' (Event ID 4101) warnings. Only after passing cleanly should you toggle Afterburner's 'Start with Windows' and 'Apply at startup' icons.
Show optional PowerShell / Registry command (advanced)Registry / System Parameter
Get-WinEvent -FilterHashtable @{LogName="System"; ProviderName="nvlddmkm","amdkmdag","Display"; StartTime=(Get-Date).AddHours(-1)} -ErrorAction SilentlyContinueCommon Optimization Mistakes & Myths
Frequently Asked Technical Questions
Does running MSI Afterburner's monitoring sensors in the background cause micro-stutters?
Yes, polling 'Power' and 'Power Percent' every 100ms on certain AMD/NVIDIA cards can occasionally cause tiny DPC spikes. Keep Hardware polling period at 1000ms (default), uncheck 'GPU Power' once your undervolt is validated, or close Afterburner completely during tournaments since your V/F curve stays loaded in the GPU driver.
Why are 1% Low and 0.1% Low showing '0' in my OSD?
Afterburner only calculates 1% Low and 0.1% Low percentiles during an active Benchmark recording session. Make sure Benchmark.dll is enabled under Monitoring -> '...' and press your assigned 'Begin recording' hotkey inside the game.
Is an undervolt safe—can it damage my graphics card?
Undervolting CANNOT physically damage your GPU because you are strictly lowering voltage and thermal stress below factory specifications. The worst consequence of going too low (e.g., 875 mV at high clocks) is a temporary game crash or driver reset—simply raise voltage by +25 mV or lower frequency by -30 MHz.
Can I use MSI Afterburner's Curve Editor on AMD Radeon GPUs?
For AMD RX 6000/7000/9000 GPUs, use AMD Software: Adrenalin Edition -> Performance -> Tuning -> Custom -> Undervolt GPU (or set Max Frequency + lowered Voltage mV directly) instead of Afterburner's curve editor, which is built primarily for NVIDIA GPU Boost 3.0/4.0.
Verify Your System Latency & Hardware Performance
Use our interactive browser tools to calculate bottlenecks and test reaction latency.