All System & Hardware Guides

NVMe SSD, DirectStorage & Shader Cache Optimization — Fix Traversal Stutters in UE5 Games (2026)

TL;DR — Verified Kernel & Driver Summary

Modern Unreal Engine 5 and open-world games stream gigabytes of Nanite meshes, textures, and compiled shaders continuously during gameplay. When an NVMe SSD exceeds 85% capacity, its dynamic SLC write cache collapses to slow native TLC/QLC flash speeds; faulty motherboard M.2 slots halve PCIe bandwidth, legacy filter drivers block Windows 11 DirectStorage BypassIO, and Windows Search indexing adds random I/O contention. Keeping 15–20% free space, running ReTrim, validating PCIe link width + BypassIO, moving games off HDD/SATA, and disabling drive indexing eliminates asset-streaming hitches.

1. Keep Every Gaming NVMe/SSD Below 85% Full to Preserve Dynamic SLC Cache

Prevents 10x Write-Speed Collapse

Consumer TLC and QLC NVMe drives rely on free NAND blocks to act as a high-speed pseudo-SLC write cache and perform background garbage collection. Once a drive passes 85–90% full, that SLC buffer shrinks dramatically—causing write speeds (shader cache updates, Windows pagefile swaps, replay buffers) to plunge from 3,000+ MB/s down to < 150 MB/s and triggering severe traversal stutters. Always keep at least 15–20% (100–200 GB on a 1 TB drive) unallocated or free.

Show optional PowerShell / Registry command (advanced)Registry / System Parameter
Registry / System Parameter
Get-PSDrive -PSProvider FileSystem | Select-Object Name, @{N="UsedGB";E={[math]::Round($_.Used/1GB,1)}}, @{N="FreeGB";E={[math]::Round($_.Free/1GB,1)}}, @{N="UsedPct";E={[math]::Round(($_.Used/($_.Used+$_.Free))*100,1)}}
How to verify it worked:Run the PowerShell snippet above and confirm UsedPct is strictly under 85% on your OS drive and all game library drives.

2. Run Manual TRIM ('Optimize-Volume -ReTrim') & Verify Automatic Delete Notifications

Restores Clean Flash Blocks

Never defragment an SSD—run TRIM instead so the NVMe controller knows which deleted game files can be pre-erased cleanly. First confirm DisableDeleteNotify is 0 (meaning Windows sends real-time TRIM commands whenever files are deleted), then run Optimize-Volume -ReTrim across your OS and game SSD drive letters (e.g., C, D) after deleting large games or patches.

Show optional PowerShell / Registry command (advanced)Registry / System Parameter
Registry / System Parameter
fsutil behavior query DisableDeleteNotify
Optimize-Volume -DriveLetter C -ReTrim -Verbose
How to verify it worked:Confirm fsutil outputs 'NTFS DisableDeleteNotify = 0 (Disabled)' (meaning TRIM is active) and Optimize-Volume finishes with zero errors.
Safe Rollback / Revert
Show optional PowerShell / Registry command (advanced)Safe Rollback / Revert
Safe Rollback / Revert
fsutil behavior set DisableDeleteNotify 0

3. Inspect NVMe PCIe Link Width/Speed & Controller Thermals (Catch x2 / Gen2 Bottlenecks)

Verifies Full x4 M.2 Bandwidth

Many motherboards wire secondary M.2 slots through the chipset at PCIe 3.0 x2 or disable lanes when SATA ports are occupied—halving NVMe throughput. Run the PowerShell query above to check HealthStatus and drive temperature (keep NVMe controller under 70°C so it doesn't thermal-throttle to 300 MB/s), and open CrystalDiskInfo to verify 'Transfer Mode' shows your drive's full spec (e.g., PCIe 4.0 x4 | PCIe 4.0 x4).

Show optional PowerShell / Registry command (advanced)Registry / System Parameter
Registry / System Parameter
Get-PhysicalDisk | Select-Object FriendlyName, MediaType, BusType, HealthStatus, Size ; (Get-PhysicalDisk | Get-StorageReliabilityCounter) | Select-Object DeviceId, Temperature, Wear
How to verify it worked:Confirm HealthStatus = Healthy, Temperature < 65–70°C under load, and CrystalDiskInfo Transfer Mode matches x4 lanes on your primary gaming NVMe.

4. Verify Windows 11 DirectStorage BypassIO Support ('fsutil bypassIo state C:\')

Unlocks Direct GPU Texture Streaming

DirectStorage 1.1/1.2 lets GPUs decompress textures straight from NVMe SSDs via BypassIO, skipping traditional OS file-system overhead. Run 'fsutil bypassIo state C:\' (and on your game drive letter) plus 'fsutil behavior query disablecompression' in an elevated prompt. BypassIO and DirectStorage fail on NTFS-compressed drives or game folders—so verify NTFS compression is off (disablecompression = 1 or folder Compressed attribute unchecked) alongside checking any blocking minifilter driver named by fsutil.

Show optional PowerShell / Registry command (advanced)Registry / System Parameter
Registry / System Parameter
fsutil bypassIo state C:\
fsutil behavior query disablecompression
How to verify it worked:Confirm fsutil prints: 'BypassIo on "C:\" is currently supported' (Storage Type: NVMe) and that your game folder does not use NTFS compression.

5. Move Modern UE5 & Open-World Games Off HDD / DRAM-less SATA SSDs onto NVMe

Eliminates Asset-Load Freezes

Spinning 7200 RPM HDDs (~150 MB/s sequential, 12ms random seek latency) and DRAM-less QLC SATA SSDs simply cannot feed Unreal Engine 5 virtual textures, Rust map chunks, or Escape from Tarkov/Warzone asset bundles in real time—causing multi-second freezes when entering new zones or scoping in. Use Steam's built-in 'Move install folder' (or Battle.net/Epic move workflow) to relocate all competitive and open-world titles onto an NVMe drive.

Registry / System Parameter
Steam -> Right-click Game -> Properties -> Installed Files -> Move install folder -> Select NVMe Library
How to verify it worked:Verify your game's installation path now resides on a drive reported as MediaType = SSD and BusType = NVMe in Get-PhysicalDisk.

6. Disable Windows Search Indexing on Game Drives & Turn Off NTFS Last Access Updates

Zero Background Disk I/O Contention

Right-click your dedicated game SSD (e.g., D:\) -> Properties -> uncheck 'Allow files on this drive to have contents indexed' (or exclude C:\Program Files (x86)\Steam\steamapps via Windows Indexing Options) so Windows Search never crawls multi-gigabyte .pak files mid-match. Additionally, setting NTFS disablelastaccess = 1 explicitly disables Last Access timestamp updates (modern Windows 11 defaults to 2 = System Managed, while 0 = always enabled), preventing extra metadata writes when games scan thousands of shader files.

Show optional PowerShell / Registry command (advanced)Registry / System Parameter
Registry / System Parameter
fsutil behavior set disablelastaccess 1
How to verify it worked:Run fsutil behavior query disablelastaccess and confirm DisableLastAccess = 1 (User Managed, Disabled), and check Resource Monitor -> Disk tab shows zero SearchIndexer.exe activity on game files.
Safe Rollback / Revert
Show optional PowerShell / Registry command (advanced)Safe Rollback / Revert
Safe Rollback / Revert
fsutil behavior set disablelastaccess 2

Common Optimization Mistakes & Myths

Common MythRunning Windows Disk Defragmenter makes SSDs faster.
Engineering RealitySSDs have zero mechanical seek penalty and wear out under constant block shuffling. Windows 'Optimize Drives' uses TRIM (ReTrim) on SSDs—never force third-party defragmentation tools on flash storage.
Common MythInstalling Windows or games on an NVMe SSD directly increases raw GPU/CPU average FPS.
Engineering RealityAn NVMe drive won't raise your peak GPU framerate in static scenes, but it dramatically improves 0.1% Low FPS and removes multi-second asset streaming stutters when moving rapidly across open worlds or loading UE5 textures.

Frequently Asked Technical Questions

Do I need a heatsink on my NVMe SSD for gaming?

Yes for PCIe 4.0 and 5.0 NVMe drives—especially if located right beneath a hot GPU exhaust. Without a heatsink, sustained shader cache writes or DirectStorage asset streaming can push controller temps past 75°C, triggering abrupt read/write throttling.

What if 'fsutil bypassIo state' says BypassIO is blocked on my drive?

Read the 'Driver:' line printed right below the blocked status—it names the conflicting storage filter driver (commonly older third-party antivirus suites, disk compression tools, or RAID drivers). Updating Windows 11, switching to Microsoft Defender, or removing legacy storage filter drivers restores BypassIO.

Does moving my NVIDIA or DirectX shader cache folder off an HDD help?

Massively. Even if a game is installed on an NVMe D: drive, Windows stores DirectX, NVIDIA (LocalAppData\NVIDIA\DXCache), and AMD shader caches on C:\ by default. Running Windows on an NVMe SSD ensures both OS paging and shader reads never stall.

Should I disable the Windows Pagefile (virtual memory) if I have 32 GB RAM and an NVMe?

No—keep the Windows Pagefile enabled ('System managed size' on your fastest NVMe SSD). Many games (Escape from Tarkov, Rust, Star Citizen, UE5 titles) reserve huge virtual commit memory blocks and crash straight to desktop if Pagefile is set to 0 MB.

Apply This Guide to Your Game & Diagnostic Tools

Verify Your System Latency & Hardware Performance

Use our interactive browser tools to calculate bottlenecks and test reaction latency.

Launch Recommended Diagnostic